Very Narrow Accent Table – An accent table is located behind a sofa. The long and narrow table is relatively simple to build. Especially if a simple design is made with the legs stretched and without much adornment. Stain the table to match the rest of your furniture. If you are using the table between the sofa and the wall, you can leave it without stains, since nobody will see it. You will use power tools to build the table, so be careful and wear protective glasses.
Cut the 2-by-4-inch lumber into four 30-inch long sections using the circular saw or a hand saw. Cut the boards 2 by 1 inch into two long pieces of 9 inches long and two pieces of 36 inches. Drill four 1/2-inch deep holes through time, each narrow side 36 inches long, 2 by 1-inch board. Make two 1/2-inch extensive holes on each short surface of the long tables of 36 inches and 9 inches. Drill a 1/2-inch long in the hole, in the top middle of each leg of the table.
12 Picture Gallery: Very Narrow Accent Table for Behind Sofa
Measure 2 inches away from the short ends of the plate by 15 by 2 inches, which is the surface of the table. Drill three holes on each side of the surface of the table, between the marks that made 2 inches on. Place the legs of the table on the bottom of the table surface, between the 9-inch and 36-inch boards at each corner. Stain the accent table if you wish using a foam brush. Paint in one direction so there are no streaks.
This post topic: Accent Table