You can add storage coffee table by adding a storage tray on the bottom side of the table. While there are kits you can buy for this purpose. And then you can make your own tableware storage trays with supplies that are easily available at a hardware store. This will allow you to customize the project to your needs. Including storage trays at each end of a table is used for tasks that require supplies at hand.
Place the two sections of U-channel on a work surface, with the sides open facing each other so that if the longitudinal joints, would form a box. A U-channel is a metal bar in the shape of a U that is used for various construction projects. It comes in a variety of metals and finishes. Select a metal and finish to complement the hardware table.
12 Picture Gallery: Storage Coffee Table Design Ideas
Measure 2 to 6 inches from each end of the U-channel sections using a tape measure and mark the measurements with a pencil. Measure and mark the center of each u-channel. Drill through the top surface of each U-channel section on the marked side in each measurement with a 3/8 inch drill bit, using the column drill. Place the channel sections in parallel to each other on the lower side of the table. With the largest to the floor hole and smaller hole against the underside of the table U.
This post topic: Coffee Table