Custom Cabinet Doors – Stock, or shop cabinets, is what you see if you go to a large home improvement shop. Each shop usually has a very basic and unfinished cabinet line. That is stock in the shop and ready to be bought and brought home that day. This is usually your cheapest choice, but the choices are very limited. Most of this time needs to be completed either by you or by the contractor. Don’t expect something spectacular, these are usually cabinets in their most basic form.
The front of the drawer custom cabinet doors is usually made. From pieces of wood glued together, not from one piece of wood. The door is usually a paneled door instead of a raised wood panel door. Wardrobe carcasses will usually be cut from the particle board, and if there is a back panel usually 1/8 “hardboard. The table fasteners will be small, plastic corner brackets with a single screw hole to attach to the fight.
12 Picture Gallery: Off The Shelf Cabinets versus Custom Cabinet Doors
Usually, the stocked is offered in very limited sizes, and while most custom cabinet doors are offered in 3 “increments, some stock cabinets may only be available in 6” increments. This is important when it comes to the overall layout of your kitchen remodel because stock cabinets are mass-produced for the same size and specifications regardless of where they go. You will usually need fillers and a final panel to make the final look when using a stock closet. The ends of each exposed cabinet, both at the top and bottom of the cabinet, must be completed according to the front of the cabinet.
This post topic: Cabinet Doors