Exterior sliding barn door hardware – The traditional barn door design has an obvious American country style. With different aesthetics, the variety and style become more colors after changing the barn door. The wall of the room where you want to install the barn door must first be the wall of the room. And if there is enough empty walls next to the normal swing door of the barn door. Because the barn door is made mostly of solid wood or metal. The weight of the door itself is very heavy and the barn door hangs and is fully supported by the upper track.
The height of the lid on the roof of the barn door is greater than 16 cm. This is determined by the size of the hardware of the barn door. And also the minimum height required by the special pulley. It must be determined according to the size of the actual installed barn door. From the barn door moves by rails. First you can decorate the entire wall of the room. If the wall is equipped with a door frame or a plinth line. And other thick ones that are not standard enough, it is necessary to decorate the wood.
12 Picture Gallery: Installing Exterior Sliding Barn Door Hardware
After fixing the holes in the wall. Install the barn door hanging track. Before fixing the track, insert the plug into the track. And then, fix the track to the wall with long screws. The two plugs are on the track. Between the two screws at the end of the side. Then, hang the door on the track. And also push the door to the left and right sides. It should be noted that the installed track must be tightened to ensure its stability.
This post topic: Bran Door