Ideas for Replace Glass Screen Door

Apr 3rd
The Old Sliding Glass Door
The Old Sliding Glass Door

Replacing glass screen door, or more accurately in sliding vinyl doors, is not complicated. However, it takes a little knowledge and patience. Most vinyl screen doors have a double-glazed pane, so even if the door is broken at least one panel is probably stuck in the door. But it is not so difficult to measure quickly and easily for a new glass panel, remove the old one. And install the new one without having to call a professional.

Cut the free old glass. Slide the razor blade along the edges of the entire glass panel to cut the vinyl tape with the glass in place. Next, you will find the plastic tabs located along the edge of the cup. These are the mounting tabs and keep the glass in place.

12 Picture Gallery: Ideas for Replace Glass Screen Door

Slide a screwdriver under each of the plastic tabs and turn upwards. Remove the tabs and then gently slide the glass sheet up and out of the door frame. Sit the new glass panel on the frame at the top of the rubber bumpers on the bottom of the frame. Align the edges with vinyl tape and then slide it to its position in the frame. Reinstall all the plastic mounting tabs and allow the door to dry for 24 hours in order to allow the tape for this engagement.

READ ALSO:   Best Suits Sliding Glass Door Replacement

This post topic: Glass Door

Other Interesting Things About Glass Door Photos