How to Measure and Put on Closet Door Handles

Feb 12th
Double Closet Doors
Double Closet Doors

Closet Door Handles – The addition of handles for your cabinets will add a personalized look. Furthermore, the handles can be attached to the doors and drawers of the cabinets. Most cabinets and prefabricated furniture do not come with handles. So, the homeowner should be installed. Handles allow doors and drawers to open easier. So, installing the handles can achieve itself in a small amount of time.

Determine the location of the door handles. Then, make sure the handles are easy to use. Because most handles are mounted on the bottom of the upper cabinets and on top of the base cabinets. Handles in front of the drawers should be mounted in the center. Then, place a piece of tape on the door and drawers where the holes should be punched. This will allow you to make marks on the tape and not on the finish of the case.

12 Picture Gallery: How to Measure and Put on Closet Door Handles

Measure the width of the handles of the mounting hole using a tape measure. Measure the width of the mounting holes in the cabinet doors. Make a cross on the masking tape, where the holes need to be punched. Drill 5 1/8 inch holes through the door using a drill and a drill bit. Remove the adhesive tape from the cabinet door. Install the screws through the rear door. Screw on the handle and tighten the screws with a screwdriver.

READ ALSO:   Install Light Closet Door Switch in Easy Way

This post topic: Closet Door

Other Interesting Things About Closet Door Photos