Tall Cabinet with Doors – One of the best areas of your home for storage in the garage. This room usually ends up holding all the extra material that you have no other place. If you’re not careful, your garage may start to look like your disorganized disaster zone. A great way to keep things together and out of the way is to put them in closets. You can buy cabinets for your garage. However, you may be able to save some money and make sure they are the right size if you build them on your own.
Build a rectangle with your two pieces of 2 feet by 10 feet of plywood 3/4 inches and two pieces of plywood 2 feet by 2 feet. These will be the top, bottom, and sides of your cabinet. Place the shelves in the cabinet. This plan will allow you nine interior shelves. The shelves are placed so that the bottom of one foot is exactly above the top of the platform below it.
12 Picture Gallery: Build Garage Tall Cabinet with Doors
Place the piece 10-feet by 2 feet 1-1 /2-inch plywood on one side of the rectangular frame. This is the back. Position the hinges at approximately 2-1 /2-foot intervals inside the cabinet. The idea is to have the four hinges evenly distributed. Place the remaining piece of plywood for the hinges. Next, connect the handle to the plywood at the opposite end of the plywood.
This post topic: Cabinet Doors